diff --git a/drivers/core/root.c b/drivers/core/root.c
index f24ddfa521..41f3039984 100644
--- a/drivers/core/root.c
+++ b/drivers/core/root.c
@@ -365,6 +365,9 @@ static int dm_probe_devices(struct udevice *dev, bool pre_reloc_only)
 {
 	u32 mask = DM_FLAG_PROBE_AFTER_BIND;
 	u32 flags = dev_get_flags(dev);
+#ifdef CONFIG_SPL_BUILD
+	printf("%s[%d] %s | %d | %u\n", __func__, __LINE__, dev->name, pre_reloc_only, flags);
+#endif
 	struct udevice *child;
 	int ret;
 


U-Boot TPL 2022.10-rc4-00032-g53b774687f-dirty (Sep 20 2022 - 12:12:51)
dm_probe_devices[369] root_driver | 1 | 4161
dm_probe_devices[369] serial@ff180000 | 1 | 66
dm_probe_devices[369] serial@ff1a0000 | 1 | 66
dm_probe_devices[369] power-management@ff310000 | 1 | 64
dm_probe_devices[369] syscon@ff320000 | 1 | 64
dm_probe_devices[369] pmu-clock-controller@ff750000 | 1 | 64
dm_probe_devices[369] clock-controller@ff760000 | 1 | 64
dm_probe_devices[369] sysreset | 1 | 64
dm_probe_devices[369] syscon@ff770000 | 1 | 64
dm_probe_devices[369] syscon@ff620000 | 1 | 64
dm_probe_devices[369] dmc | 1 | 66
dm_probe_devices[369] syscon@ff330000 | 1 | 64
Channel 0: DDR3, 666MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
Channel 1: DDR3, 666MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
256B stride
Trying to boot from BOOTROM
Returning to boot ROM...
dm_probe_devices[369] root_driver | 1 | 4161
dm_probe_devices[369] mmc@fe320000 | 1 | 66
dm_probe_devices[369] mmc@fe320000.blk | 1 | 208
dm_probe_devices[369] mmc@fe330000 | 1 | 66
dm_probe_devices[369] mmc@fe330000.blk | 1 | 208
dm_probe_devices[369] serial@ff180000 | 1 | 66
dm_probe_devices[369] serial@ff1a0000 | 1 | 66
dm_probe_devices[369] spi@ff1d0000 | 1 | 66
dm_probe_devices[369] flash@0 | 1 | 72
dm_probe_devices[369] power-management@ff310000 | 1 | 64
dm_probe_devices[369] syscon@ff320000 | 1 | 64
dm_probe_devices[369] pmu-clock-controller@ff750000 | 1 | 64
dm_probe_devices[369] clock-controller@ff760000 | 1 | 64
dm_probe_devices[369] sysreset | 1 | 64
dm_probe_devices[369] syscon@ff770000 | 1 | 64
dm_probe_devices[369] pinctrl | 1 | 32832
dm_probe_devices[369] gpio1@ff730000 | 1 | 64
dm_probe_devices[369] gpio3@ff788000 | 1 | 64
dm_probe_devices[369] bios_disable_override | 1 | 32834
dm_probe_devices[369] gpio4@ff790000 | 1 | 64
dm_probe_devices[369] pcfg-pull-up | 1 | 64
dm_probe_devices[369] pcfg-pull-none | 1 | 64
dm_probe_devices[369] sdmmc | 1 | 64
dm_probe_devices[369] sdmmc-bus4 | 1 | 64
dm_probe_devices[369] sdmmc-clk | 1 | 64
dm_probe_devices[369] sdmmc-cmd | 1 | 64
dm_probe_devices[369] syscon@ff620000 | 1 | 64
dm_probe_devices[369] dmc | 1 | 64
dm_probe_devices[369] syscon@ff330000 | 1 | 64

U-Boot SPL 2022.10-rc4-00032-g53b774687f-dirty (Sep 20 2022 - 12:12:51 +0200)
Trying to boot from MMC2
mmc_load_image_raw_sector: mmc block read error
Trying to boot from MMC1
Card did not respond to voltage select! : -110
spl: mmc init failed with error: -95
Trying to boot from MMC2
mmc_load_image_raw_sector: mmc block read error
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###