Pasthis
Raw |
New paste
Never expires.
U-Boot TPL board init
DDR4, 333MHz
BW=32 Col=10 Bk=4 BG=2 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
out
U-Boot SPL 2025.04-rc1-00007-ga2b489b170f8 (Jan 29 2025 - 16:08:44 +0100)
Trying to boot from MMC2
## Checking hash(es) for config config-1 ... OK
## Checking hash(es) for Image atf-1 ... sha256+ OK
## Checking hash(es) for Image u-boot ... sha256+ OK
## Checking hash(es) for Image fdt-1 ... sha256+ OK
## Checking hash(es) for Image atf-2 ... sha256+ OK
NOTICE: BL31: v2.12.0(release):v2.12.0
NOTICE: BL31: Built : 11:56:33, Jan 29 2025
U-Boot 2025.04-rc1-00007-ga2b489b170f8 (Jan 29 2025 - 16:08:44 +0100)
Model: Theobroma Systems PX30-uQ7 SoM on Haikou devkit
DRAM: 2 GiB
PMIC: RK809 (on=0x10, off=0x00)
Core: 290 devices, 26 uclasses, devicetree: separate
MMC: mmc@ff370000: 1, mmc@ff390000: 0
Loading Environment from MMC... Reading from MMC(1)... *** Warning - bad CRC, using default environment
In: serial@ff030000
Out: serial@ff030000
Err: serial@ff030000
Model: Theobroma Systems PX30-uQ7 SoM on Haikou devkit
Net: eth0: ethernet@ff360000
Hit any key to stop autoboot: 0
=> printenv
arch=arm
baudrate=115200
board=ringneck_px30
board_name=ringneck_px30
boot_targets=mmc1 mmc0 nvme scsi usb pxe dhcp spi
bootcmd=bootflow scan -lb
bootdelay=2
cpu=armv8
cpuid#=55524b57343730303300000000090d1d
eth1addr=d6:58:3e:65:98:c3
ethaddr=d6:58:3e:65:98:c2
fdt_addr_r=0x08300000
fdtcontroladdr=7df3dd10
fdtfile=rockchip/px30-ringneck-haikou.dtb
kernel_addr_r=0x00280000
kernel_comp_addr_r=0x03e80000
kernel_comp_size=0x2000000
loadaddr=0x800800
partitions=uuid_disk=${uuid_gpt_disk};name=loader1,start=32K,size=4000K,uuid=${uuid_gpt_loader1};name=loader2,start=8MB,size=4MB,uuid=${uuid_gpt_loader2};name=trust,size=4M,uuid=${uuid_gpt_atf};name=boot,size=112M,bootable,uuid=${uuid_gpt_boot};name=rootfs,size=-,uuid=B921B045-1DF0-41C3-AF44-4C6F280D3FAE;
pxefile_addr_r=0x00600000
ramdisk_addr_r=0x0a200000
scriptaddr=0x00500000
serial#=cbb68176fbeb7b81
soc=px30
stderr=serial@ff030000
stdin=serial@ff030000
stdout=serial@ff030000
vendor=theobroma-systems
Environment size: 958/12284 bytes
=> bdinfo
boot_params = 0x0000000000000000
DRAM bank = 0x0000000000000000
-> start = 0x0000000000200000
-> size = 0x000000007fe00000
flashstart = 0x0000000000000000
flashsize = 0x0000000000000000
flashoffset = 0x0000000000000000
baudrate = 115200 bps
relocaddr = 0x000000007ff4e000
reloc off = 0x000000007fd4e000
Build = 64-bit
current eth = ethernet@ff360000
ethaddr = d6:58:3e:65:98:c2
IP addr = <NULL>
fdt_blob = 0x000000007df3dd10
lmb_dump_all:
memory.count = 0x1
memory[0] [0x200000-0x7fffffff], 0x7fe00000 bytes, flags: none
reserved.count = 0x1
reserved[0] [0x7cf3dd00-0x7fffffff], 0x30c2300 bytes, flags: no-map
devicetree = separate
serial addr = 0x00000000ff030000
width = 0x0000000000000004
shift = 0x0000000000000002
offset = 0x0000000000000000
clock = 0x00000000016e3600
arch_number = 0x0000000000000000
TLB addr = 0x000000007fff0000
irq_sp = 0x000000007df3dd00
sp start = 0x000000007df3dd00
Early malloc usage: 25f0 / 10000
=> setenv autoload no; setenv ipaddr 192.168.133.2; setenv serverip 192.168.133.1; pxe get; pxe boot
missing environment variable: pxeuuid
Retrieving file: pxelinux.cfg/01-d6-58-3e-65-98-c2
Speed: 100, full duplex
Using ethernet@ff360000 device
TFTP from server 192.168.133.1; our IP address is 192.168.133.2
Filename 'pxelinux.cfg/01-d6-58-3e-65-98-c2'.
Load address: 0x600000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
Retrieving file: pxelinux.cfg/C0A88502
Speed: 100, full duplex
Using ethernet@ff360000 device
TFTP from server 192.168.133.1; our IP address is 192.168.133.2
Filename 'pxelinux.cfg/C0A88502'.
Load address: 0x600000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
Retrieving file: pxelinux.cfg/C0A8850
Speed: 100, full duplex
Using ethernet@ff360000 device
TFTP from server 192.168.133.1; our IP address is 192.168.133.2
Filename 'pxelinux.cfg/C0A8850'.
Load address: 0x600000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
Retrieving file: pxelinux.cfg/C0A885
Speed: 100, full duplex
Using ethernet@ff360000 device
TFTP from server 192.168.133.1; our IP address is 192.168.133.2
Filename 'pxelinux.cfg/C0A885'.
Load address: 0x600000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
Retrieving file: pxelinux.cfg/C0A88
Speed: 100, full duplex
Using ethernet@ff360000 device
TFTP from server 192.168.133.1; our IP address is 192.168.133.2
Filename 'pxelinux.cfg/C0A88'.
Load address: 0x600000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
Retrieving file: pxelinux.cfg/C0A8
Speed: 100, full duplex
Using ethernet@ff360000 device
TFTP from server 192.168.133.1; our IP address is 192.168.133.2
Filename 'pxelinux.cfg/C0A8'.
Load address: 0x600000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
Retrieving file: pxelinux.cfg/C0A
Speed: 100, full duplex
Using ethernet@ff360000 device
TFTP from server 192.168.133.1; our IP address is 192.168.133.2
Filename 'pxelinux.cfg/C0A'.
Load address: 0x600000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
Retrieving file: pxelinux.cfg/C0
Speed: 100, full duplex
Using ethernet@ff360000 device
TFTP from server 192.168.133.1; our IP address is 192.168.133.2
Filename 'pxelinux.cfg/C0'.
Load address: 0x600000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
Retrieving file: pxelinux.cfg/C
Speed: 100, full duplex
Using ethernet@ff360000 device
TFTP from server 192.168.133.1; our IP address is 192.168.133.2
Filename 'pxelinux.cfg/C'.
Load address: 0x600000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
Retrieving file: pxelinux.cfg/default-arm-px30-ringneck_px30
Speed: 100, full duplex
Using ethernet@ff360000 device
TFTP from server 192.168.133.1; our IP address is 192.168.133.2
Filename 'pxelinux.cfg/default-arm-px30-ringneck_px30'.
Load address: 0x600000
Loading: #
46.9 KiB/s
done
Bytes transferred = 242 (f2 hex)
Config file '<NULL>' found
1: linux
Retrieving file: ringneck/Image
Speed: 100, full duplex
Using ethernet@ff360000 device
TFTP from server 192.168.133.1; our IP address is 192.168.133.2
Filename 'ringneck/Image'.
Load address: 0x280000
Loading: #################################################################
#################################################################
#################################################################
########################################################This will not be a case any time
This will not be a case any time
This will not be a case any time
This will not be a case any time
This will not be a case any time
This will not be a case any time
This will not be a case any time
This will not be a case any time
This will not be a case any time
This will not be a case any time
#This will not be a case any time
[...]